Summary
This position is located at the Phoenix Indian Medical Center (PIMC) in Phoenix, Arizona, within the Division of Administrative and Engineering Services. This position is responsible for performing review and approval of contractor plans for accomplishing, detailed scope descriptions, detailed schedules, risk management approach, milestone descriptions, gathers and analyzes energy use data and prepares energy use reports and serves as the technical expert for PIMC mechanical and utility systems.
Duties
**This position is being re-advertised to solicit additional applications. Applicants who applied previously need not reapply unless submitting updated and/or missing information.**
- Provide continuous advisory services for the mechanical and utility systems of the hospital and adjacent campus buildings to the Director of Engineering Services. Assignments pertaining to the repair and improvement of real property buildings, land, and structures for hospitals, clinics, office buildings and warehouses.
- Perform and document code reviews, risk assessments, cost assessments, life-cycle planning, and heating ventilations air conditioning (HVAC) engineering design as requested by Director of Engineering Services. Assignments involve major building systems including heating, ventilation, air conditioning, plumbing, fire protection, architectural systems, electrical distribution and medical gases.
- Provide expert advice on the purchasing of proper equipment for facility mechanical system in-house projects. Performs energy and life cycle-costs analysis of mechanical systems and equipment.
- Responsible for performing the duties as a Contracting Officer Representative (COR) on professional design, mechanical and utility service contracts/projects, training service staff on technical issues and assisting the service staff on the completion of technical and administrative issues regarding infrastructure related operations of the medical facility.
- Assist the Director of Engineering Services with engineering department policy development, policy maintenance, and policy training.
- Provide guidance to managers and program officials on comprehensive management policies and procedures, including the actions to accomplish the work in alignment with established requirements.
Requirements
Conditions of Employment
Must pass pre-employment examination.
Selectee may be subject to a probationary period
U.S. Citizenship is required
Selective Service Registration is required for males born after 12/31/1959
This is a designated position covered by Public Law 101-630, requiring contact or control over Indian children. Due to this requirement, the agency must ensure that persons hired for these positions have not been found guilty of or pleaded nolo contendere or guilty to certain crimes.
Confidential Financial Disclosure Form required.
Measles and Rubella immunization required for selectees born after 1957 and seasonal influenza immunization is required for all staff working in Indian Health Service health care facilities.
Successfully pass the E-Verify employment verification check. To learn more about E-Verify, including your rights and responsibilities, visit .
As part of fulfilling the duties and responsibilities of this position, the employee may be required to occasionally drive a government vehicle.
A bank account at a financial institution is required for electronic direct deposit of salary payment.
Background Investigation: If you are selected for this vacancy, you must undergo a pre-employment fingerprint check and background investigation. Fingerprint results and background investigation documentation must be cleared prior to hire. After you begin your employment, your continued employment is contingent upon the outcome of a complete background investigation as determined by the sensitivity level of your position. The investigation must find that you are suitable for Federal employment in your position. If you are found not suitable, you will be terminated after you begin work. If you make a false statement in any part of your application, you may not be hired; you may be fired after you begin work; or subject to possible criminal charges. You may be subject to a credit check as a part of the background investigation process.
Qualifications
To qualify for this position, your resume must state sufficient experience and/or education, to perform the duties of the specific position for which you are applying.Experience refers to paid and unpaid experience, including volunteer work done through National Service programs (e.g., Peace Corps, AmeriCorps) and other organizations (e.g., professional; philanthropic; religious; spiritual; community; social). You will receive credit for all qualifying experience, including volunteer and part time experience. You must clearly identify the duties and responsibilities in each position held and the total number of hours per week.
BASIC REQUIREMENT(S):
A. Degree in Engineering: To be acceptable, the program must: (1) lead to a bachelor's degree in a school of engineering with at least one program accredited by ABET; or (2) include differential and integral calculus and courses (more advanced than first-year physics and chemistry) in five of the following seven areas of engineering science or physics: (a) statics, dynamics; (b) strength of materials (stress-strain relationships); (c) fluid mechanics, hydraulics; (d) thermodynamics; (e) electrical fields and circuits; (f) nature and properties of materials (relating particle and aggregate structure to properties); and (g) any other comparable area of fundamental engineering science or physics, such as optics, heat transfer, soil mechanics, or electronics.
-OR-
B. Combination of education and experience: College-level education, training, and/or technical experience that furnished (1) a thorough knowledge of the physical and mathematical sciences underlying engineering, and (2) a good understanding, both theoretical and practical, of the engineering sciences and techniques and their applications to one of the branches of engineering. The adequacy of such background must be demonstrated by one of the following:
1. Professional registration or licensure -- Current registration as an Engineer Intern (EI), Engineer in Training (EIT), or licensure as a Professional Engineer (PE) by any State, the District of Columbia, Guam, or Puerto Rico. Absent other means of qualifying under this standard, those applicants who achieved such registration by means other than written test (e.g., State grandfather or eminence provisions) are eligible only for positions that are within or closely related to the specialty field of their registration. For example, an applicant who attains registration through a State Board's eminence provision as a manufacturing engineer typically would be rated eligible only for manufacturing engineering positions.
2. Written Test -- Evidence of having successfully passed the Fundamentals of Engineering (FE) examination or any other written test required for professional registration by an engineering licensure board in the various States, the District of Columbia, Guam, and Puerto Rico.
3. Specified academic courses -- Successful completion of at least 60 semester hours of courses in the physical, mathematical, and engineering sciences and that included the courses specified in the basic requirements under paragraph A. The courses must be fully acceptable toward meeting the requirements of an engineering program as described in paragraph A.
4. Related curriculum -- Successful completion of a curriculum leading to a bachelor's degree in an appropriate scientific field, e.g., engineering technology, physics, chemistry, architecture, computer science, mathematics, hydrology, or geology, may be accepted in lieu of a bachelor's degree in engineering, provided the applicant has had at least 1 year of professional engineering experience acquired under professional engineering supervision and guidance. Ordinarily there should be either an established plan of intensive training to develop professional engineering competence, or several years of prior professional engineering-type experience, e.g., in interdisciplinary positions.
In addition to the Basic Requirements, you must also meet the Minimum Qualifications stated below.
MINIMUM QUALIFICATIONS:
Your resume must demonstrate at least one (1) year of specialized experience equivalent to at least the GS-12 grade level in the Federal service obtained in either the private or public sector performing the following type of work and/or tasks: Applying professional knowledge in mechanical engineering including design, fluid dynamics, manufacturing processes, machine design, thermodynamics, and heat transfers; Conduct precise engineering calculations to assess various challenges such as heat loss, required capacities, life safety compliance, size of piping, etc.; Prepare comprehensive reports and engineering statements of work for facilities undergoing modification or repair and drafting other written documents of increasing complexity; Apply facility inspection methods and procedures in order to identify existing or potential facilities deficiencies and ensure that corrective action is taken; Provide expert consultation and advice on mechanical engineering science matters, effectively addressing relevant concerns and issues.
SELECTIVE FACTOR: The selected individual must hold a current Contracting Officer Representative (COR) Level II certification (FAC-COR) from Federal Acquisition Certification for Contracting Officer's Representatives (FAC-COR) program.
You must meet all qualification requirements within 30 days of the closing date of the announcement.
How You Will Be Evaluated
You will be evaluated for this job based on how well you meet the qualifications above.
If you meet the minimum qualifications requirements for this position, your application will be evaluated and rated under Category Rating selection procedures. Once the application process is complete, a review of your qualifications will be conducted to determine if you are qualified for this job. Qualified candidates will be assigned to a quality category. The quality categories are: Best Qualified, Well Qualified, or Qualified. Within each of these categories, applicants eligible for veteran's preference will receive selection priority over non-preference eligibles.
Please note that if, after reviewing your resume and or supporting documentation, a determination is made that you have inflated your qualifications and or experience, your category rating can and will be adjusted to more accurately reflect your abilities, or you may lose consideration for this position. Please follow all instructions carefully. Errors or omissions may affect your eligibility.
To determine if you are qualified for this position, a review of your resume and supporting documentation will be made and compared against the qualifications as defined in the qualifications section of this vacancy announcement and your responses to the assessment questions. You will be rated based on the information provided in your resume (your resume must state specific duties that relate to this position) and your responses to the assessment questions will be evaluated against the duties you provided in your resume, along with your submitted documentation to determine your ability to demonstrate the following.
- Contracting/Procurement
- Mechanical Engineering
- Project Management
- Technical Competence
The following links below provide information on how you may be eligible for various hiring authorities. If you are a Veteran, qualified CTAP and ICTAP eligible, or an individual with a disability, please refer to the following links below for additional guidance. CTAP and ICTAP candidates will be eligible for selection priority if it is determined that they have exceeded the minimum qualifications for the position by attaining at least a "well qualified" rating of 85 out of 100. Information about CTAP and ICTAP eligibility is on the Office of Personnel Management's Workforce Restructuring Career Transition website at: . CTAP/ICTAP documentation requirements are listed in the "Required Documents" section of this announcement.
- Veterans, i.e. (VEOA, VRA, and 30% or more disabled) -
- Career Transition Assistance Program (CTAP) -
- Interagency Transition Assistance Program (ICTAP) -
- Schedule A Appointments for the Disabled -
Click here to view vacancy questions: . All documents above MUST be received by 11:59 pm (Eastern Standard Time) of the closing date of, 12/11/2024, to be considered.
Required Documents
Resume: You are highly encouraged to use USAJOBS Resume Builder to ensure all required information is included in your Resume. If you use your own resume, curriculum vitae, or any other written form you choose then you must describe your job-related qualifications that includes beginning and ending dates for paid and non-paid work experience, hours worked per week, month and year of employment for each job title listed, annual salary, and description of job duties. Include name and address of employer; supervisor name and telephone number.
Required as applicable for the purposes of specific eligibility and appointment claim(s), and position requirements:
- Indian Preference Applicants: If claiming Indian preference, applicants must provide a completed copy of the Form BIA-4432, "Verification of Indian Preference for Employment in the BIA and IHS Only." Indian preference will not be given unless a properly signed and dated form is submitted with your application, including any verification by an authorized Tribal Representative or BIA Official of tribal enrollment records. For detailed instructions, see form BIA-4432. Refer to BIA-4432 link: . When an Indian Preference candidate possesses Veterans preference the rules regarding Veterans preference apply under ESEP and the applicant must provide documentation in order to receive preference.
- Veterans Preference: If claiming Veteran's Preference provide a copy of your DD214 Form (Member 4 copy). To claim 10-Point Veterans Preference, submit a SF-15 Application () along with the appropriate supporting documentation. For additional information regarding Veterans Preference visit: .
- Career Transition Assistance Program (CTAP)/Interagency Career Transition Assistance Program (ICTAP): If you are claiming CTAP/ICTAP, follow the instructions below: .
- Transcripts: You are encouraged to submit copies of transcripts (official or unofficial) although not required at the time of application. You must list your courses including titles, credit hours completed, and grades. Official transcripts will be required after tentative selection and prior to issuing an official job offer.
- Licensure, Certifications: Applicants should list their license/certifications on their resume, along with the expiration date, if applicable. Certification of licensure/certification will be required after tentative selection and prior to issuing an official job offer.
If you are relying on your education to meet qualification requirements:
Education must be accredited by an accrediting institution recognized by the U.S. Department of Education in order for it to be credited towards qualifications. Therefore, provide only the attendance and/or degrees from .
Failure to provide all of the required information as stated in this vacancy announcement may result in an ineligible rating or may affect the overall rating.
